RemoteControl SNMP User Guide : LYNX Technik AG

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

RemoteControl SNMP User Guide Print

Modified on: Wed, 2 Nov, 2016 at 4:27 PM

This document provides an overview and introduction to the SNMP capabilities of
the LYNX APPolo Control System. More general information on SNMP can be found
in the links at the end of this document.

General Info on SNMP:
SNMP (Simple Network Management Protocol) is a standardized protocol (IETF
RFC1157) that has been developed for the supervision and management of IP
network equipment. Three major versions of SNMP have been defined over the
years. The capabilities of SNMPv1 have been extended by SNMPv2. While all
communication over the network is basically open (and can potentially be
monitored by 3rd parties), SNMPv3 adds some possibilities for secured login and
transmission. However, SNMPv3 does not provide any significant functional
additions. See section “Network Security” below and [1].

Did you find it helpful? Yes No

Knowledge base

RemoteControl SNMP User Guide Print

Related Articles