LYNX services and related ports:
Port 21/TCP: FTP (no anonymous login) used by the "Collect Service Information" Tool of the Appolo Control GUI
Port 80/TCP: HTTPD: simple Web-IF. after login: simple configuration of IP-settings etc.
Port 2300/TCP: LYNX internal protocol, (communication Appolo Control GUI > APPolo Control Server)
(*) Port 2301/TCP: LYNX internal protocol, (communication APPolo Control Server > APPolo Control GUI)
Port 2306/TCP: LYNX remote control (RemoteIF -- used by 3rd party control software)
Port 2306/UDP: LYNX remote control (RemoteIF -- used by 3rd party control software)
Port 2308/UDP: LNCP internal protocol, (used by the Appolo Control GUI Network Management Tool to detect Lynx Network Controller Devices)
Port 2308/TCP: LYNX internal protocol, (communication greenGUI > greenMachine)
Port 161/UDP: SNMP Agent (get/set commands)
Port 162/UDP: SNMP Agent (traps)
Port 443/TCP: greenMachine Cloud Services
Port 2307/TCP: greenMachine Preview Services
(*) If your network is very restrictive (for dynamic ports too) you can force the APPolo Control GUI to local port 2301.
To do so, right - click on the APPolo Control GUI desktop icon, click on properties and enter the following behind the path target entry:
Target: "Path/to/the/APPolo.exe" -localPort 2301
Apply the settings and start the APPolo GUI by using this desctop icon.