Test Lite Upgrade - USB driver (.dll file) missing : LYNX Technik AG

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

Test Lite Upgrade - USB driver (.dll file) missing Print

Modified on: Thu, 23 Jul, 2015 at 4:19 PM

If you get an error message (USB driver, .dll - file missing) when trying to start the Testor Lite 3G upgrade program,

please follow the steps below:

If the USB drivers has not been installed yet:

Follow the USB installation instructions in the Upgrade Guide:

http://www.lynx-technik.com/fileadmin/user_upload/support/Download_Area/LYNX_AppNote-PTG1802UpgradeProcedure.pdf

If the USB drivers has been installed earlier and the Testor Lite is shown correctly in the device manager

(USB controller knot, shown as "LYNX Technik AG PTG1802"):

Open your device manager
Open the USB-Controller knot
Right - click on "LYNX Technik AG PTG1802" and choose "de-install" and "delete drivers"
Disconnect and reconnect the Testor USB cable to your PC or Laptop
Follow the USB installation instructions in the Upgrade Guide:

http://www.lynx-technik.com/fileadmin/user_upload/support/Download_Area/LYNX_AppNote-PTG1802UpgradeProcedure.pdf

Did you find it helpful? Yes No

Knowledge base

Test Lite Upgrade - USB driver (.dll file) missing Print

Related Articles