The P VD 1800 supports up to 30 frames programmable delay (for timing) which can be set in:


1: Frames

2: Lines

3: Pixels


to add Frame delay:


Press once the encoder to Select Frames :


When the Frames LED is set to Green, start rotating the encoder clockwise. This will add the Frames delay, where 1 rotary step = 1 Frame.

During this process the "Frames LED" will turn to Orange/Yellow.

When finished press the encoder once and this will select the Lines. If you want to add the Lines delay, do as the following

When the LED is set to Green, start rotating the encoder clockwise. This will add the Lines delay, where 1 rotary step = 1 Line.

During this process the "Lines LED" will turn to Orange/Yellow.

or  press the encoder once and this will select the Pixels. If you want to add the Pixels delay, do as below otherwise press the encoder again.

When the LED is set to Green, start rotating the encoder clockwise. This will add the Pixels delay, where 1 rotary step = 1 Pixel.
During this process the "Lines LED" will turn to Orange/Yellow.


If all the LED's are set to Green = Zero Delay

If any LED's are set to Orange/Yellow = Delay set