How to set a permanent output standard to your PVD 5660 / 5806 / 5840? : LYNX Technik AG

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

How to set a permanent output standard to your PVD 5660 / 5806 / 5840? Print

Modified on: Fri, 10 Oct, 2014 at 9:37 AM

Setting a permanent output standard (e.g.1080i50) to a PVD 5806 / 5840 is quickly done following these steps:

1 - Route the video signal path for both (or one) SDI output(s) to the HiQ converter output.

2 - Click on the "HiQConv"-TAB and set the output format to 1080i50.

Note:
This will only work with even video input standards (frame rates), e.g. 625, 720p50, 1080i50, 720p25, ...!
1080i50 output signals cannot be provided with e.g. a 525, 1080p24, 720p59, ... input signals.

Additionally you may check the "Lock Image Converter Settings" box to prevent automatic change of settings.

Did you find it helpful? Yes No

Knowledge base

How to set a permanent output standard to your PVD 5660 / 5806 / 5840? Print

Related Articles