FAQ
This Application Note covers all possible ways to upgrade / update firmware of any Series 5000 card. Starting with the registration and login-process the do...
Fri, 10 Oct, 2014 at 9:37 AM
In order to save the settings of a series 5000 card module in a local backup-file on your PC or laptop, please follow the instructions below:
#1 Open ...
Fri, 10 Oct, 2014 at 9:37 AM
Controlling a rack without a rack controller (e.g. RCT5021, RCT5023 G, RCT5031) or a rack bus expander (RCT5010) is NOT possible. Remote monitoring and cont...
Mon, 10 Jul, 2017 at 4:55 PM
Setting a permanent output standard (e.g.1080i50) to a PVD 5806 / 5840 is quickly done following these steps:
1 - Route the video signal path for bo...
Fri, 10 Oct, 2014 at 9:37 AM
In some rare cases, especially when backups are created quickly after changing settings of a device, these settings can be stored incorrectly to the backup ...
Fri, 10 Oct, 2014 at 9:37 AM
You can reset the settings of your series 5000 cards in the APPolo Control GUI. Just right-click on the related device and choose "Reset Factory Defaul...
Fri, 10 Oct, 2014 at 9:37 AM
The RPS5012 power supply is made to work safely and reliable within the range of 100 V up to 240 V AC @ 50 to 60 Hz. We strongly recommend to avoid any supp...
Fri, 10 Oct, 2014 at 9:37 AM
You can download a bundle of Visio shapes including all LYNX products on our homepage:
http://www.lynx-technik.com/en/support/download-area/visio-sh...
Fri, 10 Oct, 2014 at 9:37 AM
It can happen that some parameter of a card module cannot be controlled anymore. For example routing of video signals cannot be changed suddenly.
This l...
Fri, 10 Oct, 2014 at 9:37 AM
Following modules support ASI signals:
DVD5021
DVD5810
DVD5820
DVD5830
DVO5810
DVO5820
ORX...
Tue, 2 Jun, 2015 at 4:50 PM