Please click on the link below to open a PDF-file with a table listing all supported SDI input formats.
Tue, 12 Jul, 2016 at 3:25 PM
How to find out which firmware version is currently installed on my yellobrik device?
#1 Start an upgrade exe-file and check the displayed current...
Wed, 2 Nov, 2016 at 1:01 PM
Please download the PDF-file below. You will find information about power consumption
and DC power input range for your yellobrik products.
Tue, 2 Aug, 2016 at 11:08 AM
Update manager in yelloGUI is turned off per default in order to avoid installation of older firmware versions. However this can be turned on in order to a...
Fri, 24 Nov, 2023 at 10:01 AM
If there is a HDMI signal connected (HDMI Present LED is ON) to your CHD18x2 and there is no output signal on the SDI output, please check the following t...
Wed, 2 Nov, 2016 at 1:05 PM
The attached image provides an overview of the dip switch functionality of the CDH1813 3Gbit SDI to HDMI converter.
CDH1813 cut sheet: http://media...
Fri, 11 Apr, 2014 at 2:40 PM
For detailed information about the pin assignment of the PDM1284 embedder/deembedder module see the attached image.
Fri, 10 Oct, 2014 at 2:45 PM
For detailed information of the pin assignment of the PDM1382 embedder/deembedder module´s 25pin SubD connector see the attached images. The connector assi...
Thu, 3 May, 2018 at 9:14 AM
The power connector conforms to the IEC 601310-10 standard (5.5mm OD / 2.1mm ID)
The specific dimensions of the socket and jack are: These are the m...
Sun, 10 May, 2015 at 12:52 AM
From time to time we are asked about the pin assignment of our Small Format Pluggable (SFP) optical receivers, transmitters and transceivers used in yellobr...
Thu, 30 Jul, 2015 at 9:56 AM