FAQ
Please click on the link below to open a PDF-file with a table listing all supported SDI input formats.
Tue, 12 Jul, 2016 at 3:25 PM
How to find out which firmware version is currently installed on my yellobrik device?
#1 Start an upgrade exe-file and check the displayed current...
Wed, 2 Nov, 2016 at 1:01 PM
Please download the PDF-file below. You will find information about power consumption
and DC power input range for your yellobrik products.
Tue, 2 Aug, 2016 at 11:08 AM
The update manager in yelloGUI is disabled by default to prevent the installation of older firmware versions. However, you can enable it to install a specif...
Wed, 2 Apr, 2025 at 10:48 AM
If there is a HDMI signal connected (HDMI Present LED is ON) to your CHD18x2 and there is no output signal on the SDI output, please check the following t...
Wed, 2 Nov, 2016 at 1:05 PM
The attached image provides an overview of the dip switch functionality of the CDH1813 3Gbit SDI to HDMI converter.
CDH1813 cut sheet: http://media...
Fri, 11 Apr, 2014 at 2:40 PM
For detailed information about the pin assignment of the PDM1284 embedder/deembedder module see the attached image.
Fri, 10 Oct, 2014 at 2:45 PM
For detailed information of the pin assignment of the PDM1382 embedder/deembedder module´s 25pin SubD connector see the attached images. The connector assi...
Thu, 3 May, 2018 at 9:14 AM
The power connector conforms to the IEC 601310-10 standard (5.5mm OD / 2.1mm ID)
The specific dimensions of the socket and jack are: These are the m...
Sun, 10 May, 2015 at 12:52 AM
From time to time we are asked about the pin assignment of our Small Format Pluggable (SFP) optical receivers, transmitters and transceivers used in yellobr...
Thu, 30 Jul, 2015 at 9:56 AM