Please find the L-Band application attached. Note: O TX 1910 is not available anymore, but we keep this information for customers which already ...
Wed, 20 Oct, 2021 at 12:47 PM
How to transmit RS232, RS422/485, GPI via ODT1510:
ODT1510 cut sheet: http://media.lynx-technik.de/uploads/tx_lynx/product/pdf/ODT1510_20-rev6_1_...
Fri, 28 Mar, 2014 at 5:45 PM
Yes, the OET15x0 and ODB1510-E do support Jumbo-Frames of up to 10kByte size.
As a general note (not just with respect to our own products):
Fri, 25 Apr, 2014 at 10:41 AM
What is the meaning of the LED on the SFP and the Ethernet side?
On the side of the SFP are three LED:
SFP ACT: SFP Activity ( data is ...
Wed, 12 Nov, 2014 at 4:07 PM
The processing delays for the ODT 1510, ODT 1540 and OBD 1510 D are as following: Serial interfaces (RS422, …) < 1 ms GPI 5 ms
Mon, 20 Apr, 2020 at 2:11 PM
This Application Note provides an overview of processing delays of the OTR1441 4k fiber optic converters depending on the transmitted video format.
Fri, 10 Jul, 2015 at 2:09 PM
You can use 1:1 or crossover cables, the chips are MDI/MDIX capable.
The supported pinouts are T568 A or B, both are working.
Mon, 13 Jul, 2015 at 6:17 PM
All Processing Delays measured in total of both modules with the following measurement setting: e.g Phabrix Qx1 > OTX1410 > ORX1400 > Phabrix Q...
Tue, 5 Sep, 2023 at 10:07 AM
The processing delays for the OET 1510 and OET 1540 depends on the network infrustructure with a minimum of 4ms packet latency.
Fri, 13 Mar, 2020 at 1:53 PM
The question have frequently been asked by our customers, whether the Ports can be configured or does the device support VLAN, IEE802.1, IEE802.1Q etc. ? ...
Wed, 11 Nov, 2020 at 11:15 AM