Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

Solution home APPolo Control System

APPolo Control Server

Application Note 048: How to upgrade an APPolo Control server
  Every APPolo | Control GUI release is associated with a related server version to support new features of the APPolo GUI and card modules. This Appl...
Thu, 27 Mar, 2014 at 3:51 PM
APPolo Server Update does not work (current version is smaller than 6.1.0)
If you have problems updating your LYNX Server to version 8.x.x from a version older than 6.1.0, please follow the  instructions below: Current version...
Fri, 9 Aug, 2024 at 10:36 AM
How to use NTP (Network Time Protocol) on LYNX Server
APPolo-Control-Server versions 8.2.0 and higher allow, besides manual setting, the use of an NTP time server as reference for the server's system time....
Wed, 17 Jun, 2015 at 11:33 AM
How can I backup LYNX Server settings?
Settings / configurations which will be stored / not stored in the backup file: Stored: Controller (rack frame) attachments Server configur...
Fri, 16 Oct, 2015 at 2:58 PM
APPolo Server Update does not work correctly
If you are experiencing any unexpected issues during the update procedure of the APPolo Control Server please reboot the Server (power cycle - unplug and pl...
Mon, 19 Oct, 2015 at 11:21 AM
How to replace OH_RCT5023_SERVER modules in APPolo Server Cluster
To replace the OH_RCT5023_SERVER modules in an APPolo Server Cluster, you will need a spare Rack i.e RFR 5018 with Rack Controller i.e RCT 5023-G and f...
Fri, 11 Nov, 2016 at 5:20 PM